Fabric—Mesh/Office Chairs

Special care should be given to those chairs made of fabric and stuffed with sponges when cleaning, otherwise the inner material can be easily damaged or stained. But don’t worry, you are just some quick-and-easy steps away from a clean and brand-new chair.


Step 1: Vacuum thoroughly to remove dust from the chair.

Step 2: Dilute the mild detergent into a spray bottle, and spray it all over the surface of the chair. If the fabric surface is accidently spilled with milk, juice and other drink, you should immediately blot it up with a dry cloth or paper towel before spraying the cleaner.

Step 3: Leave it for a couple of minutes and simply wipe off the stains with a microfiber cloth, and wipe again twice or thrice with clean water. 

Step 4: Put it in a ventilated place or dry it at low temperature with a dryer.


PU leather—Gaming Chairs

With a coated surface, the cleaning and maintenance of PU leather seem much easier than that of fabric chairs, you can simply wipe the leather with a soft cloth dampened with a little water and cleaner solution. However, if you are in for careful maintenance, here are some tips for you as follows.

Use a microfiber cloth instead of a rough one.

Dry cleaning is not recommended.

Apply leather care lotion over the PU surface after the dirt and stains are removed.


In addition, here come some MORE TIPS FOR BOTH TYPES OF CHAIRS.

Do not rinse the chair with running water.

Do not use organic solvents containing gasoline or alcohol. 

Do not expose the chair to the sun.

Do not scratch the surface with sharps.

Do not use water with temperature over 40℃.

The metal or plastic parts of the chair can be simply cleaned with a soft wet cloth.

Regular tightening and checking of the screws are recommended, usually biweekly or monthly.


With all the simple guidelines mentioned above, JL COMFURNI chairs can be as good as new for years.